Veloster Forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
13 Posts
Discussion Starter #1

·
Registered
2015 RB Accent not so stock 🤫
Joined
·
498 Posts
Hey guys!

I recently purchased winter rims/tire set (link below). They have a +42 offset, width size = 7.5. I'm looking to get spacers and I'm wondering what offset to get with 17inch rims (for a flush look)? Anyone have experience with this?

Best thing to do there is to buy the wheels and mount them to the car and then see if you need some small spacers for the fit you're looking for.
42mm offset looks to be close so make sure they'll fit before you buy. 👍
 

·
weekend racer
Joined
·
7,772 Posts
Yeah probably a 5mm spacer would be ideal, like my 17x7.5 enkeis but they have a lower offset.
 
  • Like
Reactions: Jakecleans

·
Registered
Joined
·
890 Posts
I have 20mm spacers on the front and 25mm spacers on the rear.
Perfectly flush.
Perfectly stock.
 

·
Registered
Joined
·
13 Posts
Discussion Starter #7
Best thing to do there is to buy the wheels and mount them to the car and then see if you need some small spacers for the fit you're looking for.
42mm offset looks to be close so make sure they'll fit before you buy. 👍
Good point, I'll test them out beforehand! Thanks!!
 

·
Registered
2015 RB Accent not so stock 🤫
Joined
·
498 Posts
Good point, I'll test them out beforehand! Thanks!!
That's what I did with my rims with a 40 offset.
They were close, very close to rubbing but worked out perfectly with only a 3mm spacer for the rear to get the fit I was looking for. Fronts were on the money but a couple mm more and I'd have run issues.
Good luck. 👍
 

·
Registered
Joined
·
22 Posts
Stock 17's with bolt on hub centric spacers, 15mm front and 20mm rear. I like it!!!
133618
133619
133620
133621
 

·
weekend racer
Joined
·
7,772 Posts
i love those base nav wheels on my turbo!
 
  • Like
Reactions: misnblu
1 - 11 of 11 Posts
Top