Veloster Forum banner

1 - 13 of 13 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
I have a 2013 Hyundai Veloster GDI which is showing a warning on the LCD screen that says "Stop When Safe - Protection Mode Enabled" that appears only after driving for a few minutes.

Please let me know if this issue is serious and what could be causing this.

. IMG-20160726-WA0001.jpg
 

·
weekend racer
Joined
·
7,403 Posts

·
weekend racer
Joined
·
7,403 Posts
why don't you start your own thread? you've posted twice in threads that were hella old and no responses.
 
  • Like
Reactions: jkt1954

·
Registered
Joined
·
799 Posts
Prolly just perusing threads looking for interesting subjects and not realizing the age factor of the thread.

As a note tho, I sure wish posters that find correction for their problems, would in fact post their results.

It sure would add to the vault of knowledge of this site, not to mention how much more helpful it would be to the members, present and future.
 

·
Super Moderator
Joined
·
4,413 Posts
Prolly just perusing threads looking for interesting subjects and not realizing the age factor of the thread.

As a note tho, I sure wish posters that find correction for their problems, would in fact post their results.

It sure would add to the vault of knowledge of this site, not to mention how much more helpful it would be to the members, present and future.
Word! You help them, they get it fixed, and they don't even come back to say "Thank you"
 

·
weekend racer
Joined
·
7,403 Posts
ah yea, i did not even realize they were the same problem. neither of these folks stuck around for more than 2-3 days...
 

·
Registered
Joined
·
295 Posts
Prolly just perusing threads looking for interesting subjects and not realizing the age factor of the thread.

As a note tho, I sure wish posters that find correction for their problems, would in fact post their results.

It sure would add to the vault of knowledge of this site, not to mention how much more helpful it would be to the members, present and future.
I agree - happens so much...the OP finds a solution and simply moves on.
 

·
Registered
Joined
·
1 Posts
I have a 2013 Hyundai Veloster GDI which is showing a warning on the LCD screen that says "Stop When Safe - Protection Mode Enabled" that appears only after driving for a few minutes.

Please let me know if this issue is serious and what could be causing this.

. View attachment 110497
Yes I am a mechanic, and a customer has brought his veloster with the same problem, this happens if any of the clutches get hot, kindly try the car and see which of the gears behaves so, I mean is it the odd gears or even gears? After detecting try to swap the acutator to see if the problem moves to either gears, if it does, change the acutator. You can also reprogram and see if any changes come. If you don't see any changes, it means you have to change a whole clutch.
 
1 - 13 of 13 Posts
Top