Veloster Forum banner
1 - 20 of 780 Posts

·
Automotive Lighting Experts
Joined
·
1,261 Posts
Discussion Starter · #1 · (Edited)
Veloster Footwell LED Kit! RGBW Multicolor & Single color kits! Control w/Phone App!


Looking to add a little color to your Veloster's interior? Diode Dynamics' RGBW Multicolor Footwell LED kits are the way to do it! By adding Diode Dynamics' LED strips under your dash, you can add RGBW color-changing ability to your Veloster's footwell area.

This kit is not just RGB, it is RGBW! That means there is an extra integrated LED chip that is specifically white in color, right next to the standard red, green, and blue LEDs. By using an RGBW controller, you can activate and control the white chip independently of the colors. This provides a much more uniform, pure, and bright white color than the traditional method of combining all RGB signals.

Our Bluetooth Controller will allow you to choose any color under the sun, including True White, directly from your phone! Our mobile app includes a wide variety of features including strobe and fade effects, preset colors, Camera Match, Music Sync, and much more. Our controller will also allow you to adjust the brightness of the LED strips. Any time you power up your strips, they will default to the last color that was previously selected.

These LED strips in this kit are highly flexible and waterproof. They feature high-density LED chips for brighter output and barrel-style M8 connectors for a secure connection.

Included in the 2-Piece Kit:
  • Two (2) 50cm RGBW SMD30 Strips
  • One (1) wiring harness (4-foot)
  • Two (2) quick splices
  • One (1) red LED toggle switch
  • One (1) DC-to-DT adapter
  • Four (4) zip-ties
  • One (1) 3M outdoor adhesive pad
Included in the 4-Piece Kit:
  • Four (4) 50cm RGBW SMD30 Strips
  • One (1) wiring harness (4-foot)
  • Two (2) quick splices
  • One (1) red LED toggle switch
  • One (1) DC-to-DT adapter
  • Eight (8) zip-ties
  • Two (2) 3M outdoor adhesive pads
  • Two (2) RGBW M8 extension wires



The 2-piece kit includes everything you need to install LED strips in the front footwell area on both the driver and passenger side of your vehicle. The 4-piece kit includes everything you need to install LED strips in the front and rear footwell areas on both the driver and passenger side of your vehicle. This kit is very universal in nature and can be tapped into any 12V power source that you would like when installing.

Any questions email us at [email protected]

PM us for the free-shipping code (U.S. forum members only)

Thanks!

Collin O.
 

·
Automotive Lighting Experts
Joined
·
1,261 Posts
Discussion Starter · #8 ·
I have a question, my 2013 remix has the add on blue LED's in the foot-well. Would it be possible that I could purchase a LED bulb and replace the ones that are currently in the car with them?
The factory LED footwell lighting isn't a bulb that can be replaced. You'd have to solder on a new LED in place of the factory unit

This footwell kit is a universal add-on

It would be easier to disconnect the factory LED footwell lighting and add our kit

Nick C.
 

·
Automotive Lighting Experts
Joined
·
1,261 Posts
Discussion Starter · #29 ·

LAST CHANCE TO SAVE!!! Until 11:59 p.m. CST on 12/2/2019, you can use coupon code "BLACKFRIDAY" at checkout for 20% off your entire order of lighting upgrades, including our NEW SS3 LED Pods!!! Don't wait, this sale ends TONIGHT!


Jake H.
Diode Dynamics

Sale ends 11:59 p.m. CST on Monday 12/2/2019. Cannot be combined with other coupon codes.
 

·
Automotive Lighting Experts
Joined
·
1,261 Posts
Discussion Starter · #30 ·

Our July 4th sale starts NOW! Today through Monday, 7/6/20, save 15% on all LED upgrades, including our New RGBW Footwell LED Kits by entering coupon code "JULY4" at checkout!


Collin
Diode Dynamics

Sale ends 11:59 p.m. CST on Monday, 7/6/20. Cannot be combined with other coupon codes.
 
1 - 20 of 780 Posts
Top