Veloster Forum banner
1 - 7 of 7 Posts

· weekend racer
2014 VT manual
Joined
·
9,729 Posts
have to pull the lamp apart and check things out or replace the assembly as a whole.
 

· Registered
Joined
·
80 Posts
On mine (2013), open the hatch, remove two black screws with a 10 mm wrench, pull the assembly back, push on the connector's tab and unplug. Be careful as you pull back on the assembly. You don't want to stress the wires.
 

· Registered
Joined
·
3 Posts
Discussion Starter · #5 ·
On mine (2013), open the hatch, remove two black screws with a 10 mm wrench, pull the assembly back, push on the connector's tab and unplug. Be careful as you pull back on the assembly. You don't want to stress the wires.
I’m just tryna figure out how to get the bottom part working (the dots).
 

· weekend racer
2014 VT manual
Joined
·
9,729 Posts
Do you know if it’s something specific or do I just gotta experiment?
i don't believe many if anyone has opened up the taillamps, they don't get customized like the headlamps do .
 
1 - 7 of 7 Posts
Top