Veloster Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Stripping down the engine, when I removed the flywheel I came across the splined bolts, grabbed a Torx T55 and undid them fine, then when I got the head stripped down to the bolts I thought OK more Torx bolts. But no, the T50 is sloppy The T55 doesn't fit trying to find online what they are and came across the T52 size as used in Audi VW heads but a friend suggested they could be a M12 Spline which I don't have. So rather than just buy either and see if they fit (not a good idea) maybe someone knows for sure. I have now spent 2 hours searching online. That's the internet for you, tons of information except the stuff you want
133572
IMG_9426.JPG
 

·
Registered
16 VT
Joined
·
839 Posts

·
weekend racer
Joined
·
7,822 Posts
that's what i was thinking as well.
 
1 - 4 of 4 Posts
Top