[Errorgance]

Does anyone know how to safely remove the driver's side a-pillar trim from a 2020 Veloster Turbo Ultimate? I've got a 2-channel dashcam I'd like to install as cleanly as possible but I'm concerned about just tucking the wires in as they would have to cross the side curtain airbag. This is my first Veloster and I've never pulled trim out of a car I cared about, so I'd like to make sure I do it in as safe a fashion as possible, and get it reattached as securely as it was prior.

Thanks in advance for any help!

 

[RPW00Mirage]

on the 1G you pulled out from the top and middle then slid it up and out from the dash.

 

[misnblu]

on the 1G you pulled out from the top and middle then slid it up and out from the dash.

Also be aware of a retaining cable attached to the pillar to keep the pillar cover from blowing off as the air curtain does its thing in a crash. ?

 

[Errorgance]

Thanks for the info!

I ended up being able to pop the pillar trim off far enough to be able to route the cables behind the airbag without having to remove the trim entirely. It popped back into place nice and securely, and all my cables are appropriately hidden.

 

[Blackdouglas76]

I wish that you would post a YouTube video. Mine popped off easily, but I can't move it over easily enough to feed the wire through with an OBD plug.