it bolts to the headlamp. you will have to remove the bumper and remove that bracket from the bumper, then remove the screws. epoxy it back in place and drill the holes about 1/2 inch longer and get longer screws.
2013 Hyundai Veloster Turbo Front Bumper
Does anyone know where i could find another one of those bumper brackets to attach it too ? Recently my bumper got ripped off & it broke the right side one off & i can’t attach the bumper on that side, send help lol.
1 - 8 of 8 Posts
Drill some small holes in the correct places and use some zip ties to pull things together. 
without that bracket you may be SOL - to be honest i dont think it does much to hold the bumper UP, just in place. on my VT i changed out the bumper radiator support brackets with thicker ones
this is how it looks on my car - the brackets busted off lol so i removed the screws, drilled longer holes and added longer screw as well as epoxy to hold everything together a little better.
![Hood Automotive tire Motor vehicle Automotive lighting Automotive exterior]()
this is the bracket i created.
![Wood Automotive exterior Bumper Material property Rectangle]()
this isn't my photo but it shows the bracket on the bottom.
![Wood Automotive design Flooring Floor Automotive lighting]()
this is how it looks on my car - the brackets busted off lol so i removed the screws, drilled longer holes and added longer screw as well as epoxy to hold everything together a little better.
this is the bracket i created.
this isn't my photo but it shows the bracket on the bottom.
1 - 8 of 8 Posts
