Veloster Forum banner

bar

  1. Pierce Motorsports rear sway bar installed - PSA

    VelosterTurbo
    Okay, so I purchased the Pierce sway bar and installed it today. Just a word of warning. Although the bar comes with two sets of holes, and thus three settings, the nearest set of holes and thus two of three settings are unusable with the stock end-links. Because the end-links are short and...
  2. Sway bar diameters between 2.0, Turbo, N

    VelosterTurbo
    Hi all, I have a question regarding sway bar configuration between the different trims. First, here are the stock sway bar diameters of each trim (from Hyundai Canada): 2.0: Front 23mm; Rear 16mm? Turbo: Front 24mm; Rear 19mm N: Front 21mm; Rear (anyone knows?) My question is: why N has a...
  3. Specs on rear stabilizer/sway bar?

    VelosterTurbo
    How would I go about getting information on the rear sway bar? I know that a stiffer rear can mitigate some understeer. But I need to know my starting point before knowing if an upgraded bar is truly an upgrade. In other words, what does "Sport Tuned Suspension" that the Turbo models have...
  4. Looking for strut bar and torsion bar

    Want to Buy Section
    Any brand name is fine. Just let me know what you got and your price. Thanks V community!
  5. LED Light Bar Install

    Hyundai Veloster DIY Tips and Tricks
    Hello All, I picked up a 13" LED light bar for the veloster. I was wondering if anyone has any suggestions on where i can mount this on stock grill.
  6. Can LED bar be used as DRL??

    Hyundai Veloster Exterior and Lighting
    Can the headlights be re-wired so that the LED light bar on the bottom of the VT headlights run as the DRL's instead of the bulb? Or in conjunction with the bulb?
  7. Just installed brand new front sway bar now right side is creaking pierce front bar

    Hyundai Veloster Suspension
    Could it be that the end links are too long and that I have to get adjustable ones? it's a piece front bar set to its stiffest setting, it actually sounds like the bushings are creaking since we only installed it yesterday.
  8. Strut Bar vs. Sway Bar ???

    Hyundai Veloster Suspension
    Morning, Looking to add some traction to my 13' NAV; which one of these are the better way to go? I am also going to add those spacers to the frame so hopefully with the combination of both, should set me straight... Any suggestions ??? Who makes the best set up? Thanks in advance for your...
  9. 3 Bar MAP sensor upgrade

    Hyundai Veloster Turbo Performance
    Enjoy the read, walnuts. Map sensor update
  10. Curt Tow Bar For Hyundai Veloster $160.00 pick up only

    For Sale Section
    This item is brand new in box. Comes with all hard ware and instructions. Direct bolt on for your Veloster. I have one on mine and it works great. I attached a bike rack. Any questions please don't hesitate to contact me. Thank you Matt
  11. Pierce Motorsports VT-One Strut bar, Pierce Motorsports Rear Torsion bar

    For Sale Section
    Up for sale are the strut bar (retail $149 + shipping) + rear torsion bar (retail $169 + shipping) combo from Pierce Motorsports. I'm looking to get $110 + shipping for the strut bar, and $120 + shipping for the rear torsion bar. The torsion bar was plastidipped black its' entire life; I peeled...
  12. Problems Installing Pierce Motorsports Torsion Bar

    Hyundai Veloster Suspension
    Hi All, Has anyone had a relatively large difference between the holes on the Pierce torsion bar and the mounting holes? If so, did you go ahead and muscle it in? Would doing that stress the suspension inward and cause premature wear? Last weekend I tried to install the bar. I used DIY advice...
  13. Coilovers, Intake, Strut Bar

    For Sale Section
    Hello everyone. I'm going back to stock for a number of reasons, and i'm selling most of the goodies I've accumulated over the last year or so. Here are the parts I have. Please feel free to PM me with any requests or questions, or just reply to this thread. Shipping will be handled on a case...
  14. WTB: rear sway bar and 1 piece strut brace

    Want to Buy Section
    Looking for near new, budget is tight. Pierce rear is 170 and the TS strut brace is 89 retail. I was hoping to get in under 200 in the used market but I won't by junk. Anyone parting out near Pittsburgh?
  15. Anyone have this Strut Bar from Korea sold by Automotiveapple

    Hyundai Veloster Suspension
    Amazon.com: Sell by Automotiveapple, Motors line Front Bonnet Strut Bar Silver type 1-pc For 2013 ~ 2015 Hyundai Veloster Turbo: Automotive After searching forums and reading up on strut bars, I would love to get one. The non turbo version of this strut bar has highly rated reviews from owners...
  16. Pierce Motorsports Rear Torsion Bar

    For Sale Section
    Selling a Pierce Motorsports Rear Torsion Bar for the Veloster. It fits turbo and NAV. It won't fit on mine because my coilovers are not compatible. Local pick up only please in DFW area. May be willing to drive an hour or two to meet up somewhere. Possibly willing to ship if buyer pays...
  17. Pierce sway bar doesn't fit

    Hyundai Veloster Turbo Performance
    I've got a 2015 VT with DGR Motorsports coilovers. I bought a used Pierce sway bar and it doesn't fit. It hits the coilovers and the holes don't line up. Has anyone else had this issue? If so what'd you do? Or what does anyone recommend?
  18. FS: Trunk upper chassis brace

    For Sale Section
    Hey guys, Selling my PierceMotorSports trunk upper chassis brace.... $70 shipped in the US only (brand new is about $90 shipped) It's in MINT condition. I am recouping some money to buy an oil catch can.... For more info...
  19. Strut bar

    Hyundai Veloster Turbo Performance
    Anyone have any suggestions on a good strut bar. After researching many different models, i figured the best way to decide is by asking people who use them. Thanks in advance
  20. LED Rally Light Bar

    Hyundai Veloster Exterior and Lighting
    Hello everyone, my question is has anyone mounted one of the long rally led light bars to your veloster. If you have id like to know which one, and how you installed, and if can post some pics. Thanks a lot.
Top