Veloster Forum: Hyundai Veloster / Veloster Turbo Forums - Recent Blogs Posts - Blogs

View RSS Feed

Recent Blogs Posts

  1. 2016 VT Rally Edition

    by , 07-30-2015 at 01:39 PM
    Hey all,
    I put a down payment on a 2016 VT Rally Edition in April of 2015. Hyundai's website said "Available May 2015." In June I called Hyundai public relations to get info. They had none, but changed their website to say "Coming summer 2015." Derek Joyce of HMA emailed me to say they should be arriving the 2nd week of July, but he still has NO info. They are not made at the HMMA in Alabama, so, they have no info.

    Anyone out out there have ANY information ...
  2. wassup guys

    by , 05-26-2015 at 03:08 AM
    wassup guys im just wondering if i got put a genesis manual transmission on my VT 2015 autotrans.
  3. Rattling... "Carbon Buildup"?

    by , 04-06-2015 at 07:04 AM
    Quote Originally Posted by cbrmale View Post
    The car is direct fuel injection so fuel goes straight into the cylinder. Fuel system cleaner WILL NOT HELP clean carbon from the inlet valves and ports. THIS BUILD-UP OF CARBON WILL AFFECT ALL VELOSTER AND VELOSTER TURBOS AT AROUND 40,000km to 60,000km unless proper, preventative action is taken. The first is a must; an oil catch can between the PCV and the inlet manifold. No ifs or buts you must have a catch can. Even with a catch can there will be a build-up of carbon on the valves and in
  4. Installing oil pressure gauge & air/fuel Ratio gauge

    by , 03-23-2015 at 12:48 PM
    Good afternoon,
    I installed the gauges from glowshift in my car yesterday, everything works except I did not hook up the line for the oil pressure gauge and the green wire for the air/fuel ration gauge since I did not know where the oxygen sensor is on the 2013 Hyundai Veloster Turbo, or where to place the oil pressure sensor switch that came with the oil pressure gauge. If anyone has installed these gauges, can you please upload photos on my thread so I may see where you installed everything ...
  5. Navigation Issue

    by , 03-10-2015 at 04:00 PM
    Wanting to know if anyone else has this issue. 2014 VT. When I put a destination in my navigation unit The estimated time of arrival is off by 3 plus hours. The mileage is correct. Example/// from my home to Albuquerque is 221 miles, it takes 3 hrs. But when I enter it, it correctly shows 221 miles, but shows it will take 6 hrs. 15 min. Only when I get 30 miles or so from destination does time start going down. It has done the same thing going to Lubbock and San Diego , both where I go frequently. ...
Page 1 of 34 12311 ... LastLast