Import Shark Custom Grill for Veloster Turbo signup list...

[Boots Ylectric]

I'd LOVE to see this...sorry to throw a wrench in the spokes lol. I may actually just try to fab it up myself come spring or something. But if this was available as a bolt on grill I'd jump on a pre-order list.

[surfmenace]

Something like this without the red part...would look sweet.

http://www.autoguide.com/gallery/d/6...er-sema-02.JPG

The stock look without the brick in FB might just not be durable enough. A lot of straight lines that might warp over time. No?

[captainofiron]

I'd LOVE to see this...sorry to throw a wrench in the spokes lol. I may actually just try to fab it up myself come spring or something. But if this was available as a bolt on grill I'd jump on a pre-order list.

that grill would look pretty awesome without that center piece and the horizontal bars.

I like how its recessed

[Oldsock]

I would be happy with the stock look, minus the brick and the logo.

[OoThomioO]

I'm down for stock without the brick and with/without the logo area. As I have said before I may not be entirely active on this forum but send me a msg and I'll respond

Anything with that brick gone is worth the money lol

[surfmenace]

So where do we send pymt? Lets get this rollin...

[GoFastVeloster]

I would jump on this... except I'm not sure how nice the cops will be when they don't see my front license plate..

Maybe sometime in the future..

I haven't run a front license plate in years and years and have never ever had an issue.

[x_Diesel_x]

I vote for OEM with no plate brick. Looks good enough, BUT keep logo. Just to break it up a little bit, if not it looks too much just like a big gaping maw.

And did y'all see the one on the Cosworth 400hp SEMA car? Not bad.





Sent from my iPhone 4S using Autoguide

[Oldsock]

I just want to clarify to avoid confusion. I would prefer the stock look, minus the brick and the logo. However, I would be happy with anything that doesn't have the brick. I'm not picky. Now start making the darn thing!

[Haywood Jablowme]

So, where we at with this thing?
Once I see what one looks like, I might be willing to cut up the NAV front end to install.

[Mike@ImportShark]

It's in the design phase right now. We should have all the costs calculated within the next week or so and I'll keep everyone posted after that on the initial timetable.

[Haywood Jablowme]

Thanks!

[Devo69695]

ok when i bought my Veloster turbo at Earnhardt Hyundai in Scottsdale AZ they had a Matt Grey turbo model in the show room with a debagged and brick less font grill. Im still trying to find out if that model just came with it or they put it on at the dealer. here in AZ we dont need a front plate and actually only get the rear plate so works for us. I really would love to have that grill seeing the brick looks stupid when you have nothing to put there. anyone else seen a VT with that grill?????

[captainofiron]

ok when i bought my Veloster turbo at Earnhardt Hyundai in Scottsdale AZ they had a Matt Grey turbo model in the show room with a debagged and brick less font grill. Im still trying to find out if that model just came with it or they put it on at the dealer. here in AZ we dont need a front plate and actually only get the rear plate so works for us. I really would love to have that grill seeing the brick looks stupid when you have nothing to put there. anyone else seen a VT with that grill?????

Is it that turbo still at that dealer? Man you should have taken some pictures. lol

[sn4cktime]

I'd be interested in one that looks just like stock without the brick or H. I don't really like front end badges. And no need for a front-plate mount here in Alberta, we're a single plate province.

[jrhartman]

I'd be interested in one that looks just like stock without the brick or H.

Agreed

[Devo69695]

Is it that turbo still at that dealer? Man you should have taken some pictures. lol

i wish it was but i guess the Matt grey ones dont last long. i keep trying to call them and see where they got it but no one has called me back. thinking im going to just need to go bust some skulls to find out where they got it.

[Devo69695]

Update: Just Heard back from Earnhardt Hyundai and they got a part number for the grill on the Matt Grey one they had in their showroom and he is right now calling other dealers to see if it does not have the fixed plate mount. So far, after calling one place he said it sounds like it still the same one but if anyone else wants to do look also here is the part number. 865612V510 lists at $75.42. He did a vin match to get the number for me. will update again once i get another call from them.

[captainofiron]

Update: Just Heard back from Earnhardt Hyundai and they got a part number for the grill on the Matt Grey one they had in their showroom and he is right now calling other dealers to see if it does not have the fixed plate mount. So far, after calling one place he said it sounds like it still the same one but if anyone else wants to do look also here is the part number. 865612V510 lists at $75.42. He did a vin match to get the number for me. will update again once i get another call from them.

that is pretty awesome.

the only hyundai grills I have seen for the turbos on the net are either with the US plate brick, or the euro plate brick (not as tall and wider as the US)

GRILLE - FRONT BUMPER. Hyundai VELOSTER (2011 - 2013) # 865612V510

I wish the assembly image was working properly. I click on the one that looks like a turbo illustration and it brings up a regular V

[Haywood Jablowme]

Still waiting for a conceptual dwg, or some indication on how import shark is going with this.
Standard grill sans the brick and logo?